Rundquist Propeller Tools, Inc.

1. Start by choosing the correct amount of spacers to properly support the bore of the propeller.
2. Chose the proper insertion funnel and driver for your application.
3. Choose one of the five rings that fits the insertion funnel that was chosen in step two.
4. Insert the ring that was chosen in step three into upper mother ring.
5. Select the proper length of studs supplied with kit to compress complete assembly together (bottom plate , propeller , insertion funnel and mother ring.)
6. Position assembly under your press directly in line with your ram. A 1'' plug is included with your kit. Install this plug to your ram plate directly in line with ram. This plug will line your hub hold down fixture in direct line with your press.
7. Hub insertion can proceed.