|
RunStation
Introducing the first scan assist station
Rundquist propeller Tools RunStation
Rundquist Propeller Tools is proud to present the first effective
single station for the repair and scanning of propellers. When
repairing and scanning a propeller the agonizing task of moving the
propeller on and off the table can become at the least annoying. With
the RunStation your propeller never has to come off the table until the
job is finished.
Working time at your scanner will be cut up to 80%. Aggravation
time caused by moving the propeller on and off on the table will be cut
by 100%. By locking our quill assembly in place the propeller can be
hammered as lightly or as hard as needed. At the same time the
table can be adjusted to a height suitable to the size of the propeller
being worked. The need of using another hammer as a dolly or buck
under the blade when hammering is eliminated by the use of our hydraulic
ram from the bottom.
RunStation Table Specifications
- Height 21 inches (height extended 31 inches)
- Width 18 inches
- Length 60 inches (with out scanner attachment)
- Working Diameter is only limited to scanning device size
- Remote control electric pump for all hydraulic operations
- Hydraulics by Enerpac
- Maximum weight limit of table 4 tons
- Working ram 10 tons with 10 inch stroke
- Working ram area is 11 inch to 28 inch radius
- Quill assembly has sixteen points of contact
- Weight 1300 pounds
Price $35,000
Click here to calculate your Return on
Investment for the RunStation
All sales are subject to and strictly conditional upon our Ordering and Returns
Policies.. Prices do not include shipping or applicable taxes.
|
