|
0 DEGREE SMALL HUB -- Used
on outboards and I/O's. Produced by all manufacturers. Common pitch range 8
through 13 pitch. Application:
-
OMC 10 HP through 100
HP pin drive
-
PJ 19 series, PJ 32
series, PJ 75 series
2 DEGREE FORWARD RAKE --
Usually wide blade propellers, 14 and 15" diameter. Right hand and left
hand rotation. Various manufacturers. Common pitch range 14 through 22
pitch. Application:
5 DEGREE AFT RAKE --
Mercruiser Black Max Series
-
48-78112-11 11
pitch
-
48-78114-13 13 pitch
6 DEGREE AFT RAKE -- Ellis inboards
8 DEGREE AFT RAKE -- Used on Mercruiser wide blade
propellers and Mercury outboards through 1979. Common pitch range is 11
through 23 pitch, right hand rotation. The TR215 Mercruiser III drives also
have this rake, but a larger series pitch block would be used. (#150 series)
Right hand and left hand rotation.
DYMEX - Inboard blocks available.
13X12LH 15X16RH 17X17RH 19X18RH
14X14LH 16X15RH 18X20LH 19X21LH
15X16LH 17X17LH 19X18LH
10 DEGREE AFT RAKE (small hub) -- Used on various
outboards such as Mercury and Yamaha through 70 HP. Very common on pontoon
boats where prop has wide blade design. Pitch range is 9 through 13 pitch,
right hand rotation.
11 DEGREE AFT RAKE -- Used on outboard and I/O
propellers, various manufacturers. Mercury propellers manufactured from 1979
and later, 70 HP through the wide blade Mercruisers. Pitch range is 11
through 23 pitch.
14 DEGREE AFT RAKE -- New style Mercury outboard,
with wide blade design. Propeller usually one inch in pitch than they are
marked. Horse power range 35 through 70 HP.
48-816702A40 12R14
48-816704A40 13R14
48-816706A40 14R14
15 DEGREE PROGRESSIVE PITCH -- Used on Mercury
outboards, 35 HP through 140 HP. Usually have a 3 inch progressive pitch.
Stainless steel and aluminum propellers.
| PROP NO. |
RPT NO. |
| 48-73132-10> |
10R15PP |
| 48-73134-12 |
12R15PP |
| 48-73136-13 |
13R15PP |
| 48-73138-14 |
14R15PP |
| 48-77344-17 |
17R15PP |
| 48-77346-19 |
19R15PP |
| 48-77348-21 |
21R15PP |
16 DEGREE AFT RAKE -- All manufacturers. Common pitch
range is 11 through 25 pitch, right hand and left hand rotation.
BLACK MAX ALUMINUM -- Used on outboards and I/O's,
150 HP and up. Mercury, Michigan, and Propco style propellers for Black Max
motors. These propellers are regressive pitched from the hub to the outer
tip.
|
PROP NO. |
RPT NO. |
PITCH |
RAKE |
|
48-78112-11 |
11RBM |
11 |
05 DEG |
|
48-78114-13 |
13RBM |
13 |
05 DEG |
|
48-78116-15 |
15R11 |
15 |
11 DEG |
|
48-78118-17 |
17RBMAL |
17 |
16 DEG |
|
48-78120-19 |
19RBMAL |
19 |
16 DEG |
|
48-78122-21 |
21RBMAL |
21 |
16 DEG |
|
48-78124-23 |
23R16 |
23 |
16 DEG |
|
48-78124-23 |
23R11 |
23 |
11 DEG |
BLACK MAX STAINLESS -- These propellers have a higher rake design
with a 3 inch progressive pitch. Mercury design used on outboards and I/O's,
right hand and left hand rotation.
|
PROP NO |
RPT NO. |
RAKE |
|
48-16312-15 |
15RBM |
16 DEG |
|
48-16314-17 |
17RBM |
18 DEG |
|
48-16315-17 |
17LBM |
18 DEG |
|
48-16316-19 |
19RBM |
20 DEG |
|
48-16317-19 |
19LBM |
20 DEG |
|
48-16318-21 |
21RBM |
20 DEG |
|
48-16319-21 |
21LBM |
20 DEG |
|
48-16320-23 |
23RBM |
16 DEG |
|
48-16321-23 |
23LBM |
16 DEG |
20 DEGREE AFT RAKE -- Used on outboard and I/O'S,
various manufacturers. OMC uses this design for aluminum, SST, and Viper
props from 25 HP through the V-6 Cobra through hub exhaust. Common pitch
range is 9 pitch through 23 pitch, right hand rotation, and 15 through 23
pitch , left hand rotation. This style propeller also used on the Volvo SX
drives. (COBRA SERIES)
23 DEGREE AFT RAKE -- Used on OMC 70 HP 3
cylinder, OMC V-4 and OMC V-6. This design is not as common as the 20 degree
aft rake.
NEW STYLE OMC V-4 PROPELLERS -- Introduced in the
Fall of 1994. All propellers have a 14" diameter and a 2"
regressive pitch. These propellers also have a high skew blade design.
|
PROP NO. |
RPT NO. |
PITCH |
RAKE |
|
176214 |
17R21 COBRA |
17 |
21 DEG |
|
176215 |
19R19 COBRA |
19 |
19 DEG |
|
176216 |
21R16 COBRA |
21 |
16 DEG |
MICHIGAN REPLACEMENT PROPELLER (MRP) -- Michigan wide
blade propeller for Mercruisers. Available in aluminum and stainless steel.
These propellers have a 3 degree aft rake and a 3" regressive pitch.
|
PROP NO. |
DIAMETER |
PITCH |
AFT RAKE |
RPT NO. |
|
SMC374C |
16-0/0" |
15 |
3 DEG |
15RMRP |
|
SMC376C |
15-3/4" |
17 |
3 DEG |
17RMRP |
|
SMC378C |
15-1/2" |
19 |
3 DEG |
19RMRP |
|
SMC380C |
15-1/4" |
21 |
3 DEG |
21RMRP |
CHRYSLER FORCE -- Semi clever blade design, 2"
progressive pitch and a parabolic rake of 12 to 14 degrees. Thru hub
exhaust. Available in aluminum or stainless steel.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
FP692 |
13-1/2 |
15 |
15RFORCE |
|
FP685 |
13-1/2 |
17 |
17RFORCE |
|
FP686 |
13 |
19 |
19RFORCE |
|
FP694 |
12-5/8 |
21 |
21RFORCE |
FORCE/CHRYSLER -- Round ear, non thru hub exhaust.
These propellers have a 3" progressive pitch and a 25 degree parabolic
rake. 70 HP through 140 HP, stainless steel and aluminum.
|
MICH. NO. |
FORCE NO. |
DIAMETER |
RPT NO. |
|
SPC180 |
PS623 |
13-1/4 |
17RSUPER |
|
SPC182 |
PS625 |
13 |
19RSUPER |
|
SPC184 |
PS526 |
13 |
21RSUPER |
INLINE QSS I88 -- These propellers have a 2"
progressive pitch with a 20 to 26 degree parabolic rake. Used for the 75
through 140 HP outboards.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-17314-14 |
13-3/8 |
14 |
14RI88 |
|
48-16986-16 |
13-1/8 |
16 |
16RI88 |
|
48-16988-18 |
13 |
18 |
18RI88 |
VOLVO APPLICATIONS
VOLVO 280 & 290 SERIES -- These propellers have an extremely
large blade area, with an 8 degree parabolic rake. (NO. 150 SERIES)
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
|
16 |
9 |
9LPV |
|
851036-4 |
16 |
13 |
13RPV* |
|
854986-7 |
16 |
13 |
13LPV* |
|
872001-3 |
16 |
15 |
15RPV* |
|
854987-5 |
16 |
15 |
15LPV* |
|
851125-5 |
15 |
17 |
17RPV |
|
851124-8 |
15 |
17 |
17LPV |
|
850865-7 |
15 |
19 |
19RPV |
|
850864-0 |
15 |
19 |
19LPV |
|
850867-3 |
15 |
21 |
21RPV |
|
850866-5 |
15 |
21 |
21LPV |
VOLVO DUO PROPS -- Propellers available for diesel engines (A
series), and gas engines (B series).
A SERIES
|
PROP NO. |
DIAMETER |
RPT NO. |
|
852249 |
13-5/8 |
VOLVODUOA1R |
|
852247 |
15-5/8 |
VOLVODUOA1L |
|
854785 |
13-3/4 |
VOLVODUOA2R |
|
854775 |
15-5/8 |
VOLVODUOA2L |
|
854786 |
14 |
VOLVODUOA3R |
|
854776 |
15-5/8 |
VOLVODUOA3L |
|
852237 |
14-1/8 |
VOLVODUOA4R |
|
852235 |
15-5/8 |
VOLVODUOA4L |
|
854789 |
14-1/4 |
VOLVODUOA6R |
|
854779 |
15-1/4 |
VOLVODUOA6L |
B SERIES
|
PROP NO. |
DIAMETER |
RPT NO. |
|
853621 |
12-7/8 |
VOLVODUOB1R |
|
853611 |
14-1/2 |
VOLVODUOB1L |
|
853622 |
13-1/4 |
VOLVODUOB2R |
|
853612 |
14-1/2 |
VOLVODUOB2L |
|
854832 |
13-1/2 |
VOLVODUOB3R |
|
854824 |
15 |
VOLVODUOB3L |
|
853624 |
13-3/8 |
VOLVODUOB4R |
|
853614 |
14-5/8 |
VOLVODUOB4L |
|
854834 |
13 |
VOLVODUOB5R |
|
854826 |
14-1/8 |
VOLVODUOB5L |
|
853626 |
12-3/4 |
VOLVODUOB6R |
|
853616 |
13-3/4 |
VOLVODUOB6L |
|
854836 |
12-5/8 |
VOLVODUOB7R |
|
854828 |
13-3/4 |
VOLVODUOB7L |
|
853628 |
12-1/2 |
VOLVODUOB8R |
|
853618 |
13-5/8 |
VOLVODUOB8L |
MIRAGE -- Used on outboard and Bravo outdrives.
Pitch range is 17 thru 25 pitch. Propellers have a parabolic rake from 14
degree (17 pitch) to 25 degree on the highest pitch.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-18278-17 |
15-1/2 |
17 |
17RMIRAGE |
|
48-90159-17 |
15-1/2 |
17 |
17LMIRAGE |
|
48-13700-19 |
15-1/4 |
19 |
19RMIRAGE |
|
48-13701-19 |
15-1/4 |
19 |
19LMIRAGE |
|
48-13702-21 |
14-3/4 |
21 |
21RMIRAGE |
|
48-13703-21 |
14-3/4 |
21 |
21LMIRAGE |
|
48-13704-23 |
14-5/8 |
23 |
23RMIRAGE |
|
48-13705-23 |
14-5/8 |
23 |
23LMIRAGE |
|
48-13706-25 |
14-1/2 |
25 |
25RMIRAGE |
|
48-13707-25 |
14-1/2 |
25 |
25LMIRAGE |
|
48-18280-27 |
14-3/8 |
27 |
27RMIRAGE |
|
48-18281-27 |
14-3/8 |
27 |
27LMIRAGE |
HI-5 (V-6) -- These propellers have a 3"
progressive pitch and a parabolic rake of 26 to 30 degrees. Used on V-6
outboards and Mercruiser applications.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-821154-17 |
13-1/2 |
17 |
17RHI5 |
|
48-815758-19 |
13-1/4 |
19 |
19RHI5 |
|
48-815760-21 |
13-1/4 |
21 |
21RHI5 |
|
48-815762-23 |
13-1/4 |
23 |
23RHI5 |
|
48-816374-25 |
13-1/4 |
25 |
25RHI5 |
HI-5 (V-4) -- These propellers have a 2"
progressive pitch and a parabolic rake of 30 degrees. Used on the 75 through
150 HP outboards and XR4 series.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-816612-20 |
12-3/4 |
20 |
20RHI5 |
|
48-815744-22 |
13 |
22 |
22RHI5 |
|
48-815746-24 |
12-3/4 |
24 |
24RHI5 |
|
48-815748-26 |
12-3/4 |
26 |
26RHI5 |
LASER -- These propellers have a 3" progressive pitch and a
parabolic rake of 20 to 23 degree aft parabolic rake. Used for the V-6
outboard and Mercruiser applications.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-11070-21 |
14-1/2 |
21 |
21RLASER |
|
48-11074-23 |
14-1/2 |
23 |
23RLASER |
|
48-11078-25 |
14-1/2 |
25 |
25RLASER |
LASER II (V-6) -- A newer version of the Laser propeller with a
4" progressive pitch and a 26 to 29 degree aft parabolic rake.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-16543-19 |
14 |
19 |
19RLASERII |
|
48-16545-21 |
13-7/8 |
21 |
21RLASERII |
|
48-16547-23 |
13-3/4 |
23 |
23RLASERII |
|
48-16549-25 |
13-3/4 |
25 |
25RLASERII |
|
48-19709-27 |
13-3/4 |
27 |
27RLASERII |
LASER II (XR4) -- These propellers have a small diameter thru hub
barrel with a 4" progressive pitch and a 30 to 33 degree parabolic
rake. Used with the XR4 series and the inline motors.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-16990-20 |
13-1/4 |
20 |
20RLASERII |
|
48-16992-22 |
13-1/2 |
22 |
22RLASERII |
|
48-16994-24 |
13-1/2 |
24 |
24RLASERII |
|
48-16996-26 |
13-1/2 |
26 |
26RLASERII |
TROPHY (SMALL HUB) -- These propellers have a 4-1/4" hub
size, a 2" progressive pitch and rake reading 28 to 32 degree parabolic
rake.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-825934 |
13-3/4 |
21 |
21RTROPHY SH |
|
48-825938 |
13-3/4 |
23 |
23RTROPHY SH |
|
48-825940 |
13-3/4 |
24 |
24RTROPHY SH |
|
48-825942 |
13-3/4 |
25 |
25RTROPHY SH |
|
48-825944 |
|
26 |
26RTROPHY SH |
TROPHY (LARGE HUB) -- These propellers have a 4-3/4 hub size, a 0
to 2" progressive pitch and a 28 to 32 degree parabolic rake.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-825904 |
14 |
21 |
21RTROPHY |
|
48-825908 |
14 |
23 |
23RTROPHY |
|
48-825910 |
14 |
24 |
24RTROPHY |
|
48-825912 |
14 |
25 |
25RTROPHY |
|
48-825914 |
14 |
26 |
26RTROPHY |
TEMPEST -- These propellers have a 2 to 3" progressive pitch
and a 25 to 30 degree parabolic rake.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-825864-23 |
14-1/2 |
23 |
23RTEMPEST |
|
48-825866-25 |
14-1/2 |
25 |
25RTEMPEST |
|
48-825868-27 |
14-1/2 |
27 |
27RTEMPEST |
CHOPPER -- These propellers have an over the hub exxhaust with
three lugs cast to the forward end of the hub which act as weed cutters. All
propellers have a progressive pitch and a 23 to 25 degree parabolic rake.
Pitches available: 18, 20, 22, 24, 26, 28, 30 RH
EXAMPLE: RPT NO. 18RCHOPPER
BRAVO III -- These propellers have a 2 to 4" progressive
pitch and a 6 to 11 degree parabolic rake.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-823662-20 |
14-2/5 |
20 |
20RBRIII |
|
48-823661-20 |
16 |
20 |
20LBRIII |
|
48-823664-22 |
14-1/4 |
22 |
22RBRIII |
|
48-823663-22 |
15-3/4 |
22 |
22LBRIII |
|
48-823666-24 |
14-1/4 |
24 |
24RBRIII |
|
48-823665-24 |
15-1/2 |
24 |
24LBRIII |
|
48-823668-26 |
14 |
26 |
26RBRIII |
|
48-823667-26 |
15-1/4 |
26 |
26LBRIII |
|
48-823670-28 |
13-3/4 |
28 |
28RBRIII |
|
48-823669-28 |
15 |
28 |
28LBRIII |
BRAVO II -- Available in aluminum only. These propellers have a 3
to 4" progressive pitch and an 8 to 15 degree parabolic rake. A general
rule - the higher the pitch the higher the rake. A #150 series pitch block
is required for these propellers.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
48-18606-11 |
20 |
11 |
1RBRII |
|
48-18607-11 |
20 |
11 |
11LBRII |
|
48-18608-13 |
19-1/2 |
13 |
13RBRII |
|
48-18609-13 |
19-1/2 |
13 |
13LBRII |
|
48-18610-15 |
18-1/4 |
15 |
15RBRII |
|
48-18611-15 |
18-1/4 |
15 |
15LBRII |
|
48-18612-17 |
17-3/4 |
17 |
17RBRII |
|
48-18613-17 |
17-3/4 |
17 |
17LBRII |
|
48-18614-19 |
17-1/4 |
19 |
19RBRII |
|
48-18615-19 |
17-1/4 |
19 |
19LBRII |
|
48-18616-21 |
16-3/4 |
21 |
21RBRII |
|
48-18617-21 |
16-3/4 |
21 |
21LBRII |
|
48-18618-23 |
16-1/2 |
23 |
23RBRII |
|
48-18619-23 |
16-1/2 |
23 |
23LBRII |
|
48-18620-25 |
16-1/4 |
25 |
25RBRII |
|
48-18621-25 |
16-1/4 |
25 |
25LBRII |
HIGH PERFORMANCE APPLICATIONS -- OMC
RAKER (V-4) -- These propellers have a 2" progressive pitch
and a 30 degree parabolic rake.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
394759-20 |
13-1/2 |
20 |
20RRAKERV4 |
|
394760-22 |
13-1/2 |
22 |
22RRAKERV4 |
RAKER (V-6) -- These propellers have been manufactured in
straight pitch and progressive pitch and a 28 to 30 degree parabolic rake.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
394752-18 |
14-1/2 |
18 |
18RRAKERV6 |
|
394753-20 |
14-1/2 |
20 |
20RRAKERV6 |
|
394754-22 |
14-1/2 |
22 |
22RRAKERV6 |
|
394755-24 |
14-1/2 |
24 |
24RRAKERV6 |
|
394756-26 |
14-1/2 |
26 |
26RRAKERV6 |
|
394757-28 |
14-1/2 |
28 |
28RRAKERV6 |
SHOOTER -- These four blade stainless steel propellers have a
3" progressive pitch and a 32 degree parabolic rake.
|
PROP NO. |
DIAMETER |
PITCH |
RPT NO. |
|
431717 |
13-1/2 |
23 |
23RSHTR |
|
431718 |
13-1/4 |
25 |
25RSHTR |
|
431719 |
13-1/4 |
27 |
27RSHTR |
PRECISION TURBO -- V-4 and V-6 propellers with a 2 to 3"
progressive pitch and a 21 to 25 degree parabolic rake. The pitch blocks
Rundquist manufactures for the Turbo propellers will also work to repair the
majority of the Stiletto propellers.
PITCHES AVAILABLE -- 18, 20, 22, 24, 26
Example RPT NO. - 18RTURBO
propapp.11/95
|
